A family in a 1990s block in Bedok orders a 1.6 metre sintered-stone dining table in November for their year-end move. Delivery day comes, the team gets the top to the lift lobby, and it won't go in. Not upright, not diagonal, not at any angle two people can safely hold. Nobody measured the lift.
The problem
A dining table isn't like a sofa. Most large sofas can be turned, tilted or split into sections. A stone-top dining table is one rigid slab. Ours are typically 1600 by 900 millimetres with an 11 millimetre sintered-stone top, and that slab has to travel from the lorry to your dining room without bending, because it can't.
The lift is the choke point. Older HDB blocks often have lift cars that are shallower than 1.6 metres, with door openings that are narrower than the car itself. A 1.6 by 0.9 metre slab has to go in standing on its long edge, then rotate through the door, then stand in the car with the ceiling height to spare. Whether that works depends on four numbers most people have never measured: the door opening width, the door opening height, the internal depth of the car and the internal height of the car.
Condos add a fifth: the service lift. Many condos only allow furniture up the service lift, only on weekdays, only in booked windows, and only with padding fitted. Miss the booking and the table goes back on the lorry.
Why it happens
People measure the room and forget the route. The dining zone is checked, the doorway is checked, and the lift is assumed to be fine because "it's a lift". In December, when delivery slots are packed and the team has three other drops that day, there's no time to improvise.
The other cause is that tables are bought by the table's dimensions, not the packed dimensions. A slab in its protective crate is a few centimetres bigger in every direction.
What to do about it
Step 1: Measure the lift, not just the room
Go down with a tape measure. Record the door opening width and height, and inside the car, the depth from door to back wall, the width and the ceiling height. Do it for the lift the delivery team will use, which in a condo is the service lift. Take a photo of the numbers next to the lift. If your block has more than one lift, check whether they differ. In some older blocks one car is deeper than the other.
Step 2: Give the team the numbers before you confirm
Send the lift measurements together with the door widths and the corridor width on WhatsApp when you enquire about a table in our dining table collection. The team can work out whether a specific top can travel on its edge through your lift, and if not, whether a different size or an extendable model that packs shorter is the better call. This is a two minute conversation before you order, and a very long afternoon if you skip it.
Step 3: Pick the table for the route, not only the room
A 1600 millimetre top like the Imperial Microcrystal Dining Table fits most modern HDB lifts on its edge without drama. If your lift is one of the tighter older ones, an extendable table that closes to 1400 millimetres travels more easily and still opens up for guests. The legs and frame come separately and are never the problem. It's always the top.
Step 4: Sort the building side a week ahead
For a condo, book the service lift and ask management what padding, deposits and timing windows they require, then send the confirmed window to the delivery team. For HDB, check that no renovation in your block has the lift padded and reserved for a contractor that day, and that the void deck has somewhere a lorry can stop. Our FAQ covers what's included on delivery, and installation is part of it, but the lift booking is yours.
Before you decide
- Measure the lift door opening: width and height.
- Measure inside the lift car: depth, width and ceiling height.
- Measure your main door and the corridor outside it.
- Send all of it to the team before confirming a stone-top table.
- In a condo, confirm the service lift booking rules and windows.
- Ask for the packed dimensions of the top, not only the table size.
Questions people ask
Can a 1.6 metre dining table fit in an HDB lift?
Usually yes, standing on its long edge, in most blocks built from the 2000s onwards. Older lifts vary, so measure the door opening and the car depth before you order.
What happens if the table doesn't fit in the lift on delivery day?
For low floors the team may be able to carry it up the stairs, subject to the stairwell. Otherwise it has to be rescheduled, which is why we ask for lift measurements at the point of order.
Can a sintered-stone table top be removed from its frame for delivery?
The legs and frame are separate from the top and are assembled in your home. The top itself is a single slab and can't be split.
Message our showroom team on WhatsApp with your lift and door measurements and we'll tell you which tables travel well to your unit and when they can arrive. Or come and see the sizes side by side at Sims Avenue or Labrador.




